radiomuseum.org
Please click your language flag. Bitte Sprachflagge klicken.

ECH81

Information - Help 
ID = 375
       
Country:
Europe
Brand: Common type Europe tube/semicond.
Tube type:  Triode-Heptode   Frequency converter   Controlling (mu) 
Identical to ECH81 = 6И1П = X719 = 6C12 = CV2128 = 6AJ8
Similar Tubes
Normally replaceable-slightly different:
  6E2_Magnadyne ; 6E4_Magnadyne ; 6U1
Other class quality (otherwise equal):
  E81CH
Different maximum ratings:
  ECH83
Heater different:
  12AJ8 ; HCH81 ; UCH81 ; XCH81
First year 1952 Tube leaflet collection E.Erb Analysis by original leaflets
First Source (s)
Apr.1952 : TRM524
Predecessor Tubes ECH42   ECH43   ECH171   ECH21  

Base Noval, 9 pin miniature (USA pico-9) B9A
Was used by Radio/TV-reception etc.
Filament Vf 6.3 Volts / If 0.3 Ampere / Indirect / Specified voltage AND current AC/DC
Description

According to our profound investigations and tests, the tubes ECH81 and ECH83 are equal - not even tested differently, but only stamped differently. They naturally show different values for a different usage (volts anode). See this forum article here about that.

 
Text in other languages (may differ)
Tube prices 39 Tube prices (visible for members only)

ech81.png
ECH81: Courtesy Bureau Belper (De Muiderkring, Bussum), Scan Frank Philipse
Karel De Reus †

uch81_so~~1.png ECH81: rtt
Anonymous 10 Collector

More ...

Just Qvigstad
ech81_valvo_data_01.png
ECH81: Valvo
Dietrich Grötzer

More ...
Usage in Models 2= 1950?? ; 12= 1952?? ; 24= 1952? ; 226= 1952 ; 40= 1953?? ; 101= 1953? ; 494= 1953 ; 91= 1954?? ; 147= 1954? ; 853= 1954 ; 204= 1955?? ; 206= 1955? ; 969= 1955 ; 111= 1956?? ; 265= 1956? ; 1077= 1956 ; 98= 1957?? ; 274= 1957? ; 1021= 1957 ; 139= 1958?? ; 242= 1958? ; 1065= 1958 ; 61= 1959?? ; 247= 1959? ; 953= 1959 ; 249= 1960?? ; 180= 1960? ; 832= 1960 ; 56= 1961?? ; 174= 1961? ; 717= 1961 ; 77= 1962?? ; 151= 1962? ; 638= 1962 ; 82= 1963?? ; 137= 1963? ; 576= 1963 ; 71= 1964?? ; 118= 1964? ; 497= 1964 ; 100= 1965?? ; 136= 1965? ; 365= 1965 ; 40= 1966?? ; 80= 1966? ; 260= 1966 ; 22= 1967?? ; 60= 1967? ; 173= 1967 ; 30= 1968?? ; 34= 1968? ; 82= 1968 ; 27= 1969?? ; 16= 1969? ; 47= 1969 ; 24= 1970?? ; 5= 1970? ; 26= 1970 ; 2= 1971?? ; 6= 1971? ; 13= 1971 ; 4= 1972? ; 12= 1972 ; 1= 1973?? ; 3= 1973 ; 3= 1975?? ; 1= 1975? ; 1= 1978 ; 1= 9999?? ; 7= 9999? ; 74= 9999

Quantity of Models at Radiomuseum.org with this tube (valve, valves, valvola, valvole, válvula, lampe):15132


Collection of

Collection of a member from SK
Collection of a member from D
Collection of a member from D
Collection of a member from FIN
Collection of a member from D
Collection of a member from FIN
Collection of a member from D
 
ech81_71rm408d.jpg

ECH81
 

Variants

The early Philips productions of noval tubes were run on the same lines already in use for rimlock valves. These productions are identifiable by the sharp and regular edge of the base, glass frit bonded or glazed to the body. Another peculiar feature of these tubes is that the electrode pack is firmly welded to some of the base pins, no large mica spacers pressed against the internal wall of the envelope.


Forum contributions about this tube
ECH81
Threads: 3 | Posts: 5
Hits: 4797     Replies: 1
ECH81Curve traces
Joe Sousa
06.Dec.10
  1

Fellow Radiophiles,

In recent discussions with Jacob Roschy, it has become apparent how popular and versatile the ECH81 tube is. Jacob has used it in many of his transmitter and receiver designs. However, the extensive manufacturer's curves focus on the original intended application as Heptode-Mixer&Triode-Oscillator, or as Heptode RF amplifier.

I include here some additional curves that explore the behaviour of G3, which is normally used for local oscillator (LO) injection. This choice of grid requires a relatively wide p-p input for efficient mixing, but this is easily supplied by the independent triode oscillator. This leaves G1 independently available for RF input with remote cutoff. The nominal conversion transconductance is specified as 775uS.

Other Heptodes, such as the very common 6BE6/EK90, are designed for LO injection at G1 and RF input at G3. In the self-oscillating configuration, the nominal transconductance is 455uS, and up to 600uS with a heavy 1mA separate LO injection into G1.

Some of the advantage of the ECH81 is the higher transconductance of RF input grid.

 

 

 

 

 

Comparing the effect of the control grid G1 on plate current to the effect of the LO injection grid G3.

G2=G4=60V

The third photo was taken with 5V/div horizontally.

 

 


Comparing the effect of control grid G1 with LO injection grid on G2-G4 Screen currents. Note the non-inverting voltage gain and negative transconductance from G3 to G2-G4.


G2=G4=120V. This is the nominal recommended screen bias. Note how much higher the gm1=<4.6mS is than the gm3=<1mS. This is even more so, near 0V bias for either grid.

The very modest gm3 has hardly any effect when added to gm1 by driving both grids simultaneously as seen in the next photo.

The photo on the right was done with -2V/step at G3. Note how sudden and sharp it's cutoff is with -18V at the lowest trace.


The following curves were done with reduced G2=G4=30V screen voltage with particular application to the little Luis Freixa Periquito radio I repaired recently.

Each column of the following 9 plots represents three source resistances driving the stepped grids: 0Ω,  100kΩ, 1Meg0Ω.

The first row shows the control of G1, the second row shows the control of G3 and the last row shows the simultaneous control of G1+G3 in parallel drive.

Note how severe the attenuation is at low control grid G1 voltages at 0V. The third grid G3 retains a high impedance down to zero volts as can be seen in the right-most column.

As was seen for higher voltages at G2=G4=120V, driving G1 and G3 simultaneously, as opposed to driving just G1, has little effect on the plate current with G2=G4=30V.

Regards,

-Joe

Bob Isaac
08.Dec.10
  2

Joe,

 If ever I am having doubts about my lack of knowledge in the area of radio, I simply read one of your articles.  Your brain is a scary thing indeed.

All joking aside, thank you for yet another informative and interesting article.  Please 'keep em coming!'

Thanks again,

Bob

 
Hits: 5646     Replies: 0
ECH81 (ECH81) mit Gas: Auswirkung auf Schwingkreis
Dietmar Rudolph † 6.1.22
20.Jun.08
  1 Die Auswirkung des Fehlers
Bei der Siemens Kammermusik-Schatulle M57 (Vorstufensuper für LMK) war der AM Empfang sehr schwach. Es fehlten ungefähr 40 dB Verstärkung. Das Magische Auge (EM80) sprach auch beim Empfang des Ortssenders (Deutschlandradio Kultur, 990 KHz) praktisch nicht an; es war nur ein grüner Strich in der Mitte zu sehen. Die ECH81 arbeitete jedoch augenscheinlich als Mischer korrekt. Dagegen war der Empfang auf UKW gut und das Magische Auge schlug voll aus. Das H-System der ECH81 funktionierte als 2. ZF-Verstärkerstufe (10,7 MHz) anscheinend richtig.

Suche nach der Ursache
Aufgrund der Auswirkung (UKW: gut; LMK: schlecht) fiel der Verdacht zunächst auf das Tastenaggregat. Die ursprünglich versilberten Kontakte sind mittlerweile ziemlich schwarz. Vielleicht hat der Vorbesitzer nur noch UKW gehört und die AM-Kontakte sind deshalb mit einer schlecht leitenden Schicht überzogen? Eine Behandlung der Kontakte mit "Kontakt 61" und häufigem Schalten brachte jedoch keine Verbesserung zustande.
Nächste Überprüfung war der Widerstand der Schaltkontakte mit dem Ohmmeter. Auch die AM-Kontakte hatten kleine Übergangswiderstände. Was nun?

Nun hat die Schatulle M57 eine Besonderheit, nämlich 3 Tasten für die Mittelwelle: MW (für Außenantenne), MW (für Ferritantenne) und MW (für Ortssender-Empfang).
Schaltungsmäßig ist der AM Teil hierbei so realisiert:
  • Vorkreis bzw. FA-Antenne ⇒ EF89 ⇒ Zwischenkreis ⇒ ECH81 (für die beiden ersten Fälle)
  • Vorkreis ⇒ EF89 ⇒ (aperiodisch) ⇒ ECH81 (für Ortssender-Empfang)
Da an der gleichen Antenne der Empfang (des gleichen Senders) mit "Ortssender-Empfang"  besser war, fiel nun der Verdacht auf den Zwischenkreis. Auch hier ergaben Messungen mit dem Ohmmeter, daß primärseitig und sekundärseitig die Widerstandswerte stimmten, also keine Unterbrechung oder kein Kurzschluß vorlag. Das Radio war ausgeschaltet bei der Messung. Eine Überprüfung von Eingangs- und Zwischenkreis mit dem Wobbler ergab "vernünftige" Kurven. Nanu, doch alles o.k.?

Also, Radio wieder einschalten und Eingangskreise wobbeln. Durchlaßkurve sieht zwar wieder vernünftig aus, aber wieder fehlen ca. 40 dB Verstärkung. Drehen wir uns im Kreise?? Also Trimmer des Zwischenkreises verdrehen: Keine Wirkung erkennbar! Kern verdrehen: auch keine Wirkung! Die sichtbare Resonanzüberhöhung kommt vom Vorkreis, wie sich durch Verdrehen des zugehörigen Trimmers feststellen läßt. Also ist der Zwischenkreis völlig "platt"!? Da jedoch die Messung bei ausgeschaltetem Gerät ergab, daß der Zwischenkreis eine Resonanz zeigte, kann es nur noch an den beiden Röhren (EF89 oder ECH81) liegen.

Messung der ECH81 mit dem Röhrenprüfer

Die Überprüfung auf dem Funke W19 ergab:
  • EF89 o.k.; ECH81 o.k., Steuerwirkung: gut, mit Vorwiderstand im Gitter geht der Anodenstrom hoch !
Also hat die ECH81 Gas gezogen.
Eine neue ECH81 und ein nun fälliger Abgleich der Eingangskreise brachte das gewünschte Ergebnis.

Das Ausgangskennlinienfeld der Heptode der ECH81

Die besagte ECH81 hat zusätzlich die Besonderheit, daß der Getterspiegel bis zu den Pins heruntergeht, wie die beiden Bilder zeigen.
  
Das kann jedoch kaum für den geschliderten Effekt verantwortlich sein, denn sonst hätte auch die Messung bei ausgeschaltetem Gerät keine Resonanzüberhöhung des Zwischenkreises zeigen dürfen.

Interessant ist die Messung der Ausgangskennlinien der ECH81, wobei die Kennlinien ohne und mit einem  Widerstand (100KΩ) in der Gitter-1-Leitung aufgenommen wurden.
   
Das linke Kennlinienfeld ergibt sich, wenn kein Widerstand vor dem Gitter 1 der Heptode der ECH81 liegt. Es sieht "ganz normal" aus. Dieser Betriebsfall tritt beim M57 auf, wenn UKW eingestellt ist. Hier arbeitet die ECH81 auch ganz "normal".
Das rechte Kennlinienfeld ergibt sich, wenn ein Widerstand von 100 KΩ vor dem Gitter 1 liegt. Dies ist ähnlich dem Betriebsfall im AM-Bereich, wobei beim M57 tatsächlich ein noch größerer Widerstand (ca. 3 MΩ) vor dem Gitter 1 liegt. Hier sieht man, daß die Kennlinien ansteigen, wie man es sonst nur von einer Triode her so ähnlich kennt.
Aber - die ECH81 hat trotzdem in den AM-Bereichen als Mischer gearbeitet, obwohl sie den Zwischenkreis infolge Gitterstromes so gedämpft hat, daß dieser keinerlei Resonanzüberhöhung mehr hatte und demzufolge die Verstärkung im AM-Bereich viel zu gering wurde.

Die gleichen Messungen mit einer "gesunden" ECH81 ergaben kaum meßbare Unterschiede zwischen beiden Kennlinienfeldern.

MfG DR
 
Hits: 9116     Replies: 1
ECH81 (ECH81)
Pietro Gallia
10.Aug.06
  1

I have some ECH81S (Telefunken), but I don't know the difference with ECH81.

Ernst Erb
10.Aug.06
  2 Dear Pietro
Since you wrote in English - well done for being understood by more members - you should show the flag for English. Many members will probably have opted out articles with some other language flags - or they will not open languages they don't understand.

If you want that your question is seen by more members please go to this thread, click "Edit", change language to English and then click Submit - and your question will have the flag for English. The right language selection at the Wysiwyg-Editor is only necessary for the first post of a thread since this one shows the language flag for the whole thread.
cordially,
Ernest
 
ECH81
End of forum contributions about this tube

You reach this tube or valve page from a search after clicking the "tubes" tab or by clicking a tube on a radio model page. You will find thousands of tubes or valves with interesting links. You even can look up radio models with a certain tube line up. [rmxtube-en]
  

Data Compliance More Information